How to install a wood deck?

How to install a wooden terrace?/How to install a wooden terrace? To best answer this question, refer to the installation instructions available here or to the installation instruction video available here.

There are also several tutorials available on the download page.

Comment installer une terrasse en bois Softline ?

Example of a wooden terrace in Teak made by La Parqueterie

Can I remove or replace a deck board?

Yes, both systems allow you to remove or replace a board anywhere in the deck without disassembling it completely. Please refer to the installation instructions available here or to the installation video available here.

Do I need to have a level structure?

Yes, in order to facilitate the installation of the terrace, it is imperative to put all your structure at the same level or at least to follow the slope of the concrete slab in a regular way if it is not too important.

What is the minimum height between the ground and the wood deck?

You will need at least 75mm of space to install a Softline or Technideck deck. In order to prolong the life of your deck, it is however advised to have a minimum of 100mm under the deck (blade), the ideal being located around 150mm under the blades.

For more information on this subject, please contact your local dealer.

What is the right spacing for my structure?

The Softline system requires a 400mm clearance. The Technideck system requires, depending on the type of wood, a center distance of 400, 462.5 or 500mm. To facilitate installation, spacers are available with the Technideck system for easy and precise spacing of the joists. For more information, please refer to the current product installation instructions available on the download page.

Is it possible to build a staircase with the decking systems?

Yes, it is possible. Vetedy is one of the few manufacturers of hidden fastener decking systems that has designed its systems to allow stairs and all kinds of finishes to be created with a single fastener and in a 100% invisible manner. Technical drawings are available on the download page.

Can a deck be built with a finishing belt?

Yes, it’s possible. Vetedy is one of the few manufacturers of invisible fastener decking systems that has designed its systems to allow for the creation of finishing belts and all kinds of other finishes with a single fastener and in a 100% invisible manner. Technical drawings and installation instructions are available on the download page.

Is there a solution for the deck edge boards?

Yes, it is quite possible. Vetedy is one of the few manufacturers of invisible fastener decking systems that has designed its systems to allow finishing edges and all kinds of other finishes to be achieved with a single fastener and in a 100% invisible manner. Technical drawings and installation instructions are available on the download page.

Why is it essential to follow the installation instructions?

All outdoor construction is put to the test throughout the year. Although Vetedy ‘s hidden fastener decking systems are designed to withstand the vagaries of the weather, it is essential to follow the installation guidelines to ensure that the systems last over time.

How to build your wooden terrace? – In which direction should I lay my terrace?

It’s all a matter of taste, but it’s generally advisable to lay the deck lengthwise and/or toward the light if the deck is covered.

What are the main principles of installation?

To best answer this question, please refer to the installation instructions available here or to the installation instruction video available here.

How should I start installing my terrace knowing that I have an earthen floor?

The most economical solution in terms of material is to make concrete blocks and cover the soil with a geotextile. Then build a supporting structure with large section beams.

How do I start the installation of my deck knowing that I have a gravel floor?

On a gravel ground, it is possible to tamp the gravel where you will make piles with concrete slabs on which the raising blocks will be placed.

On what surface can I place my deck?

It is possible to build your deck on any solid support that guarantees the durability of the deck structure, under the conditions of use prescribed by the suppliers of this. This includes: Flat roofs with or without waterproofing, wood or metal frame structure. The ideal is to lay the terrace on a concrete slab with a sufficient slope for the drainage of the water and then on blocks. Unfortunately it is not always possible to have a concrete slab due to budget, available space or location of the floor. You can make concrete stringers or concrete blocks distributed in such a way as to comply with the installation instructions for our Softline or Technideck decks. For any other support: Stabilized, gravel slabs etc., please contact your local distributor that you can find here.

Can I use foundation screws to build my deck without creating a concrete slab?

Yes, no problem. Refer to the manufacturer’s instructions for installation.

What is the ideal distance for load-bearing beams?

It all depends on the type of wood and the sections of the beams. Please refer to your dealer for more information.

What is the ideal distance for concrete blocks?

How to install a wooden terrace? The distance between two concrete blocks depends on the type of wood and the section of the beams. For more information, please refer to your nearest Vetedy contact.

How can I make a discreet access hatch in my terrace?

Vetedy decking systems allow for discreet access hatches in your deck. Illustrations are available in the download page.

Is it necessary to put a bituminous strip?

How to install a wooden terrace? No, our decking systems do not require bituminous strips under the boards because the fastening clips act as aeration.

Is it necessary to have a deck edge set against the walls?

It is recommended to leave a gap between the boards and the walls. The distance usually left is 10mm.

Do I have to pre-drill to screw in the clips?

No, it is not necessary to pre-drill the clips into the joists, unless you are working with joists with a density of 1000kg/m3. If you use the Technideck system on aluminum joists or if you use the Softline clips on generic aluminum joists, you only need to use self-drilling screws for aluminum.

Do I need to fix my studs to the ground?

How to install a wooden terrace? It is advisable to fix the studs to the ground whenever possible. Be sure to secure the studs to the deck structure as much as possible.

What are the most common installation errors?

How to install a wooden terrace? The first and most common error is the failure to respect the joist spacing which must be 400mm for the Softline system.
The second mistake is to not properly press the clip against the previous board. The ergo (spacer) of the clip must absolutely touch the previous board.

Find our Softline installation video here